+86 17302072825
info@bluesky-machine.com

GI Duct [Profile-2] Roll Forming Production Line

GI Duct [Profile-2] Roll Forming Production Line

I. Profile drawing:

II. Process flow:

Passive uncoiling → Guide feed → Hydraulic punch hole (2 stations) → Roll forming → Cut off bending (2 stations) → Unloading

III. Machine Component details:

1. Uncoiler:

(1)   Uncoiler                           : Passive feeding, manual expansion

(2)   Loading Weight              : ≤ 3T

(3)   Uncoiler Coil I. D            : 508mm

(4)   Rolling range                  : 470-530mm

2. Roll Former:

(1)   Main frame: High quality steel after welding and tempering

(2)   Guide - pillar hydraulic punching mechanism     : forward punch 2 stations

(3)   Punching hole mould                                              : 2 sets

(4)   Punch hole mould up and down template material: high quality 45 carbon steel

(5)   Up and down mould material                                 : Cr12Mov or SDK11

(6)   Up and down mould heat treatment hardness   : HRC58-62

 

(7)   Forming machine type: wall plate chain drive

(8)   Shaft material          : 40Cr quenching and tempering treatment (HB220-260)

(10) Shaft diameter                                    : Φ60 (HRB Bearing)

(11) Forming machine motor power        : 7.5KW (Hard tooth surface reducer)

(12) Forming machine line speed           : 0-5m\min

(13) Roller way nos                                   : 16 Nos

(14) Rolling thickness                               : 0.7mm

(15) Expanded width of rolled material   : The actual width of the test plate shall prevail

(16) Length limit                                         : ±1.5mm

(17) Roll forming mold                               : 1 set

(18) Roll material                                        : 45# steel

(19) Hydraulic punching mechanism      : back punch 2 stations (including cutting off)

(20) Cut mold                                              : Stop machine hydraulic cutting

(21) Bending mechanism                         : Hydraulic flip plate bending after forming

(22) Hydraulic system power                   : 15KW

(24) Hydraulic system cooling               : Air cooling

(25) Hydraulic station pump                     : Vane pump or plunger pump

3.  Unloading  Table:

(1)   Structure of unloading roller               : Angle welding, drum type (no power)

(2)   Unloading roller material size            : 1500mm * 2pcs

(3) Voltage                                       : 415v,50Hz,3ph (as per user)

IV. Equipment structure:

The main machine is composed of passive uncoiler, Roll forming (including feeding, hydraulic cutting and unloading table), Hydraulic system, Electric control system, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specification
Raw MaterialTypeGalvanized Sheet
Thickness0.7mm
PerformanceSpeedMax. 30m/min
UncoilerTypeManual
Capacity3 T
Main MachineMain Roller Station16
Main DriveHydraulic Motor or Servo Motor
Transmission TypeChain
CuttingCutter TypeHydraulic
Cutter MaterialCr12
Video
Inquiry

¿Necesita ayuda con las soluciones de trabajo realizado en láminas metálicas? ¡Somos los expertos!

Copyright© Guangzhou Blue Sky Machine Co.,Ltd
chevron-right